PVC card production process introduction

PVC card production process introduction

With the development of the industry, customers have higher and higher requirements for PVC Cards and membership Cards, but they are not quite sure how these processes can achieve a desirable effect, in fact, each production process is a kind of technology, and different processes have different requirements for various aspects of materials, so in this regard, customers also need to have some understanding.

1. printing spot-color gold: spot-color gold is four colors plus spot-color printing, this printing method 4-color piece of hollow spot gold position, that is, the set of printing. This printing gold process will not fall, but the cost is higher, must open a special edition printing.

2. hot stamping: hot stamping is the metal printing plate heated, the application of foil, embossed on the printed material with gold text or patterns; half of the PVC card above all will choose local hot stamping. This stamping process will fall off over time.

3. screen printing silver bottom (plus flash bottom): this process is in the printing before, first to the base plate to add flash, and then in the printing color, if the base color is silver, then do out there is a silver flash effect. If it is gold that is gold flash, this process is very common; most of the bank Cards have printed this process.

4. over UV oil: this process is a special process, after the completion of printing. UV oil can be added locally, UV oil is transparent, after adding UV surface is raised, more three-dimensional sense.

The above are some basic processes in the production of PVC Cards, but also the most used types, if you want to produce the ideal effect of PVC Cards and membership Cards, you need to have a certain understanding of the production process, in the selection of materials and a basic understanding of various aspects, so that you can come out of the product to your satisfaction.